ITsVISTA
Information that makes life easier when it comes to installing, managing, and using Windows Vista.
Start About FAQ Blogroll Shop

ITsVISTA KB-Link: KB970658

iSCSI Initiator dialog box displays a reconnecting session status after you disconnect and then reconnect the physical connection to the iSCSI target on a computer that is running Windows Server 2008 or Windows Vista

Consider the following scenario:

  • You have an iSCSI initiator on a computer that is running Windows Server 2008 or Windows Vista.
  • You configure both IPv4 addresses and IPv6 addresses for servicing storage requests on iSCSI targets.
  • You disconnect and then reconnect the physical connection between the iSCSI initiator and the iSCSI targets.
  • You open the iSCSI Initiator dialog box to check the status of the iSCSI targets.

In this scenario, the status of the iSCSI targets displays a reconnecting session status. Additionally, you cannot access the iSCSI disks because of this issue.

There is a download that resolves this issue. See Hotfixes for details.
64-Bit Download: Contact Microsoft

For more information on this issue, including potential causes, workarounds, and resolutions, see: Microsoft KB Article KB970658.

Get notified of new posts for FREE via RSS or E-mail

Subscribe to ITsVISTA!

Related Posts

Comments

  • There are no comments yet...Come on, share your thoughts!

Leave a Comment